Nominal operating conditions and parameters
Filament voltage””””””””””””””””””””””””2.1 V*
Nominal filament current”””””””””””””””””””” 1.0 A
Plate voltage”””””””””””””””””””””””””160 V
Grid voltage”””””””””””””””””””””””””£3.0 V
Plate resistance--------------------------------------------------------------------8.1 kohms
Plate current””””””””””””””””””””””””0.34 mA
Amplification factor”””””””””””””””””””””” 29.2
* Direct-current filament supply is used. The grid and platter returns are connected to the negative end of the filament
Characteristics-Average characteristics
Figure 3. shown typical curves of plate currents of grid voltage for several values of plate voltages. It is alternating-current filament supply.

Fig.3
Limiting Operation Conditions for Safe Nor-nor simultaneous ratings
Maximum plate voltage”””””””””””””””””””””” 190 volts
Maximum plate current””””””””””””””””””””””1.5mA
|